- THERMAL INSULATION
- Uw 0,79 W/m2K
- NUMBER OF CELLS
- 5-6
- INSTALLATION DEPTH
- 76 mm
- NUMBER OF GASKETS
- 2/3
Energeto NEO windows are a proposal that combines modern technology, high energy efficiency and aesthetic design. The system is characterised by a low heat transfer coefficient (Uw), which minimises heat loss and increases the energy efficiency of buildings. As a result, it helps maintain an optimum indoor temperature and reduces heating costs. Energeto NEO windows are available in two variants: (a) AD (Additional Sealing): – The Neo 76 AD system has additional seals that improve insulation properties and increase protection against wind, rain and noise. These seals provide excellent water and air tightness. b) MD (Middle Gasket) seal: – The Neo 76 MD has a third middle gasket, which further improves the insulating properties and increases protection against wind, rain and noise. The middle gasket is located in the window rebate area, which significantly improves the tightness of the system.
Construction of the profile
- 5 or 6-chamber profiles 76 mm thick.
- The pronounced rebates, which are almost half as narrow as in other systems, give the windows a lightness.
- Extremely narrow profile folds maximise glazed areas and allow more light into the interior.
- System with steel reinforcement.
- Glazing packets and fillings up to 54 mm wide are possible.
- Multi-chamber construction for excellent thermal and acoustic insulation.
- Choice of two (AD) or three (MD) seals.
- The special extruded centre rebate in the MD variant provides a barrier against attempts to reach the hardware and balance the sash.
- The third, internal gasket in the MD variant provides a better seal of the entire construction, improves thermal and acoustic properties.
Profile supplier
Window advantages
MICRO-VENTILATION CLIP
A fitting function that allows the room to be ventilated without opening the sash.
HANDLE
Aluminium handle with secustic, security button or key function.
BOTTOM HINGE
Also available in a concealed version – Designo. 3D hinges adjustable in three planes with a load capacity of up to 130 kg.
SPACER
The spacer is available in steel or plastic – the so-called ‘warm frame’, made with polymer or composite technology in a wide range of colours.
HANDLE ROTATION LOCK
A fitting function that enables uncontrolled turning of the handle in the tilt position, while also being responsible for the correct positioning of the sash when it is closed.
TILT&TURN FITTING
A fitting for the comfortable ventilation of rooms with an additional microventilation function and adjustable sash tilt in winter-summer mode.
MICRO-VENTILATION CLIP
A fitting function that allows the room to be ventilated without opening the sash.
HANDLE
Aluminium handle with secustic, security button or key function.
BOTTOM HINGE
Also available in a concealed version – Designo. 3D hinges adjustable in three planes with a load capacity of up to 130 kg.
SPACER
The spacer is available in steel or plastic – the so-called ‘warm frame’, made with polymer or composite technology in a wide range of colours.
HANDLE ROTATION LOCK
A fitting function that enables uncontrolled turning of the handle in the tilt position, while also being responsible for the correct positioning of the sash when it is closed.
TILT&TURN FITTING
A fitting for the comfortable ventilation of rooms with an additional microventilation function and adjustable sash tilt in winter-summer mode.
Colours Energeto NEO
PLEASE NOTE: The full range of colours, including non-standard veneers, is available in our showrooms and in the sales network of our Business Partners.
The presented graphic materials are for illustrative purposes only and the actual colours and textures of the products may differ from those shown in the advertising materials.
The presented graphics, including the presentation of colours, cannot constitute grounds for a complaint.
Explore other PVC windows
Softline Veka 76 MD
- THERMAL INSULATION
- Uw 0,77 W/m2K
- NO. OF CHAMBERS
- 5+
- INSTALLATION DEPTH
- 76 mm
- GLAZING PACKAGE
- 48 mm
BluEvolution Salamander 82
- THERMAL INSULATION
- Uw 0,79 W/m2K
- NO. OF CELLS
- 5-6
- INSTALLATION DEPTH
- 76 mm
- NO. OF GASKETS
- 2/3
Softline Veka 82 MD
- THERMAL INSULATION
- Uw 0,74 W/m2K
- NO. OF CHAMBERS
- 6
- INSTALLATION DEPTH
- 82 mm
- GLAZING PACKAGE
- 52 mm
Get a Free Estimate
“We’re eager to hear about your ideas! Please complete the form below, and we’ll get back to you promptly.
We’ll work tirelessly to ensure that your design is a perfect reflection of your style and lifestyle.